13X APG Molecular Sieve for Air Separation

13X APG Molecular Sieve for Air Separation

Pingxiang, China
Pingxiang, China
Company
86-799-3415381
Kalila Deng
Contact person

Basic Information

CAS No. 11113-61-4
Other Names Zeolite
MF Na2O . Al2O3 . (2.8±0.2)SiO2 . (6-7)H2O
Place of Origin Jiangxi China (Mainland)
Usage Coating Auxiliary Agents
Brand Name Pingxiang Petrochemical
Model Number 13X
Type Adsorbent
Adsorbent Variety Molecular Sieve
13X APG Molecular Sieve for Air Separation Zeolite Molecular sieve 13X-APG is the sodium form of the type X crystal and has a much large pore opening than the type A crystals.It will adsorb molecules with a kinetic diameter of less than 9 Angstrom(0.9nm) and exclude those larger. It also has the highest theoretical capacity of the common adsorbents and very good mass transfer rates.It can remove impurities too large to fit into a type A crystal and is commonly used to separate nitrogen from oxygen Typical Chemical Formula Na2O . Al2O3 . (2.8±0.2)SiO2 . (6-7)H2O SiO2 : Al2O3 ≈2.6-3.0 Technical Parameter Item UnitTechnical dataShapePelletSphereDiametermm1.5-1.73.0-.3.31.7-2.53.0-5.0Size ratio up to grade%≥98≥98≥96≥96Bulk densityg/ml≥0.68≥0.68≥0.68≥0.68Wear ratio%≤0.10≤0.20≤0.10≤0.10Crushing strengthN≥30/cm≥45/cm≥25/piece≥65/pieceStatic water adsorption%≥23.5≥23.5≥23.5≥23.5Static CO2 adsorption%≥18≥18≥18≥18Water content,as shipped%≤1.5≤1.5≤1.5≤1.5 Application 1) Removal of CO2 and moisture from air (air per-purification) and other gases 2) Separation of enriched oxygen from air 3) Removal of mercaptans and hydrogen sulphide from natural gas 4) Removal of mercaptans and hydrogen sulphide from hydrocabon liquid streams(LPG,butance,propane etc.) 5) Catalyst protection,removal of oxygenates from hydrocarbons(olefin streams) 6) Removal of n-chained compositions from aromatics 7) Production of bulk oxygen in PSA units 8) Production of medical oxygen in small scale oxygen concentrators Regeneration Pingxiang Petrochemical molecular sieve Type 13X can be regenerated by either heating in the case of thermal swing processes or by lowering the pressure in the case of pressure swing processes. To remove moisture from a 13X molecular sieve, a temperature of 250oC-300oCis required.Aproperly regenerated molecular sieve can give moisture dew points below -100oC or mercaptan or CO2 levels below 2ppmv. The outlet concentrations on a pressure swing process will depend on the gas present,and on the conditions of the process. Size 13X-Zeolites are available in beads of 1-2mm(10×18mesh),2-3mm(8×12mesh),2.5-5mm(4×8mesh) and as power and in pellet 1.6,3.2 Attention To avoid damp and pre-adsorption of organic before running,or must to be reactivated.

Delivery terms and packaging

Packaging Detail: Steel drum,each drum 50kg-150kg,inside airtight vacuum packing.One 20ft container can pack 12 tons. Other packing is available upon your request. Delivery Detail: with in 10 days for one 20ft container
Port: Shanghai,Qingdao or Shenzhen

Payment term

Documents Against Acceptance

Documents Against Payment

Letter of credit

Telegraphic transfer

MoneyGram

Western Union

Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1

    Дата события:

    12.10.2016 - 18.10.2016
    Catalog
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product